These lightweight Satellite
Alignment
Tools are compatible with Dish Network
and DirecTV systems and
can be powered
with either rechargable battery packs,
or the satellite
receiver.
Accessories included are charger,
12VDC car adapter,
NiCd Battery Pack,
leather carrying case,
and an RG6 Jumper.
Highly Sensitive Meters with
Built-In ABS Plastic Housing
with
Built-in Buzzer and Pitched Tone
for Alignment Reference.
Front Panel Sensitivity Control for
RF and DC Pass-Through with 75Ω
950-2050MHz Input .
Sensitivity 7mV@55dB, LNB Gain 3-
Carrier C/N 15dB,
Input Level -25 to -
75dBm, LNB Gain 52-60dB,
Power
Requirements 13-18VDC,
Requires
6dB attenuator for 60-65dB LNB gain.
Highly Sensitive Meters with
Built-In
Buzzer in durable ABS Plastic Housing
with
Built-in Buzzer and Pitched Tone
for Alignment Reference.
Front Panel Sensitivity Control for
RF and DC Pass-Through with 75Ω
950-2050MHz Input .
Sensitivity 7mV@55dB, LNB Gain 3-
Carrier C/N 15dB,
Input Level -25 to -
75dBm, LNB Gain 52-60dB,
Power
Requirements 13-18VDC,
Requires
6dB attenuator for 60-65dB LNB gain.
LNB
Alignment
Tools
DSS
Circular Ku-Band LNBF
Dual
Satellite Signal Level Meter
Single LNB Meter
DirecTV Dual-Feed DSS LNBF
Genuine DirecTV Replacement
True-Circular Polarized LNBF
High Performance and Stability
DirecTV/Dish Network 300 Compatible
Fits rectangular RCA Tube or D-Tube arm-dishes except Sony and Hughes
plastic mounts, Excellent Noise Attenuation and Cross Polarization
Harsh-Environment, Weatherproof
RF Input Frequency 12.2-12.7 GHz
IF Output Frequency 950-1450MHz
LO Stability 11.25GHz ±2MHz @22°C, 11.25GHz ±4MHz @-35-52°C
Converter Gain 50-62dB±0.5dB max.
Converter Noise 0.9dB typ., 1.1dB max.
Output VSWR 75Ω 2.0:1 max.
Power 10.5-14VDC RHP
Power 15.5-21VDC LHP
Dual Satellite Signal Level Meter
Simultaneously measures adjusts and monitors two satellite LNBs
Provides accurate alignment of altitude, elevation and tilt-skew.
Amplified broadband detector and variable gain controls allow detection of
wide range of input levels. Audio tones enable rough signal
detection. Meter deflection for precise signal acquisition.
Meters can be independently switched between level, current, voltage and
22kHz tone measurement. Frequency Range 950-2150MHz Impedance 75Ω,
Insertion Loss 4.5dB. Internal Rechargeable Battery 100mA 11hrs.
Battery Life 500 Charge/Discharge Cycles. Includes 24VDC 100mA
transformer. Includes custom carrying case
7 1/2˝(W) x 5 7/8˝(H) x 5 1/4˝(D)
Weight: 3.0-lbs
Hand-Held SkyTracker™ Signal Meters,
For Precise Satellite Position Location,
Dish Network® and DirecTV® Compatible
Compact Design, Microprocessor Controlled High Sensitivity for Receiving
Weak Signals Attenuation Adjustment for Strong Signals Visual/Audio
Readout for Hands-Free Operation Precision Machined F-Connector Ports
Built-in Beeper, Volt/mA Meter Short Circuit Protection with Fuse, 75Ω
Impedance, Input Frequency 950-2150MHz,
Optional Accessories Kit, CE Approved
Single-LNB Meter,
LED and Audio Indicators,
Identifies DiSEqC and 22kHz,
Powered by Receiver or DC Supply,
Meter Ranges 10-20V, 0-500mA,
Input level 20-100 dBµV,
5 3/4" (W) x 2 1/4" (H) x 3/4" (D)
CATV
Amplifiers
Satellite Inline Amplifiers
Mast Mount Signal Booster
High-Quality Satellite IF Inline
Amplifiers Suitable for DBS or Satellite
Applications. Power
Requirements
12-18VDC 45mA, Impedance 75Ω,
Frequency 40-2250MHz, DC Pass-
Through Current 500mA max.
Output Level 105dBµV max.
Low Noise 5dB, Input Return Loss
6dB, High-Performance SMD Board
Circuitry, Precision Machined
F-Connector Threads Nickel-Plated
Zinc-Alloy Cast Housing 16-20dB
Sloped 950-2250MHz Amplifier Sloped-Gain for
Long-Cable Runs
Solder-Backed Back Cover Plate
51-800630
16-20dB
Sloped 950-2250MHz Amplifier
51-800632
20dB 40-2250MHz Inline Amplifier
51-800634
16-20dB Sloped 40-2250MHz Amplifier
51-800636
20dB 950-2250MHz
Inline Amplifier
28dB Mast-Mount
Signal Booster,
Low-Noise, Lightning Protection,
VHF Gain 28dB, UHF Gain 22dB,
54-890 MHz UHF-VHF FM,
117VAC 60Hz Power Supply,
Input Impedance 75-300Ω,
Output Impedance 75-300Ω,
Booster 2˝(W) x 5 1/4˝(H) x 1 1/2˝(D), Power Supply 3˝(W) x 1 5/8˝(H) x
4˝(D)
Accessories
RG59 Cable Clips
Available in 4 Styles
and Sizes for Attaching
Coaxial Cable to
Horizontal or Vertical
Aluminum or Vinyl
Siding
RG6 Cable Clips
Available in 4 Styles
and Sizes for Attaching
Coaxial Cable to
Horizontal or Vertical
Aluminum or Vinyl
Siding
RG6 Cable Clips
Available in 4 Styles
and Sizes for Attaching
Coaxial Cable to
Horizontal or Vertical
Wood or Masonry
Nail mount
RG59 Wall Seal
Bushings Seals wall openings
Secures and protects
cable
Impact-Resistant ABS
Plastic Construction
RG6 Wall Seal
Bushings Seals wall openings
Secures and protects
cable
Impact-Resistant ABS
Plastic Construction
Weatherproof Boots Tapered-Inner-Diameter
Weather Boots
Suitable for Regular
Tri-Quad Shield Series
6 and 59 Coaxial Cable
Flexible Rubber Const
$0.04
$0.05
$0.05
$0.04
$0.07
$0.27
Accessories
Split Bolt Ground High-Clamping Force
Split-Bolt Connectors
Suitable for Copper
Copper-weld
Connections