Bulk Fiber MultiMode/Dx, OM1, 62.5/125, 2mm, OFNR, ORG - Per Foot
You Have:0 Items
Total:$0.00

User login

Bulk OM1 Fiber MM/Duplex, 2mm, OFNR - Per Foot

This orange bulk fiber has the full compatibility with the broad range of laser-based applications and more. 

SKU:
91-802900-0000O

Specifications

Fiber Performance       Mechanical and Environmental  
Fiber Code
WLS
Industry Standard Designation
OM1 ISO/IEC 11801
Core/Cladding Diameter (μm)
62.5/125
Wavelength (nm)
850/1310
Maximum Cabled Attenuation (dB/km)
3.5/1.5
Primary Coating Diameter (μm)
245
Secondary Buffer Diameter (μm)
900
Gigabit Ethernet Distance (m)
300/600
Proof Test Level (kpsi)
100
Impact Resistance
EIA/TIA-455-25A
750 Impacts
Crush Resistance
TIA/EIA-455-41A
500 N/cm
Operating Temperature
-40°C to +85°C
Storage Temperature
-55°C to +85°C
Installation Temperature
(actual temp. of cable)
-10°C to +60°C
Flame Retardancy
UL Listed Type OFNR
(ANSI/NFPA 262) and FT4
(CSA C22.2 No. 232)
Installation and Operating Characteristics       Cable Characteristics  
  Installation Operating
Max Tensile Load
500 N (100 lbs)
167 N (38 lbs)
Min Bend Radius
3.8 cm (1.5 in)
2.5 cm (1.0 in)
Jacket Color
Orange
Jacket Material
Indoor/Outdoor PVC
Buffer Material
PVC
Cable Weight
7 kg/km (5 lbs/1000')
Cable Diameter
1.6 mm x 3.5 mm ( 0.06 in x 0.14 in)

Applications

  • Used in LAN and distribution applications where small size, lightweight, and versatile installation capability are required between floors in non-plenum spaces
  • Ideal configuration for a multi mode termination point requiring multiple fibers
  • Transfer of gigabit ethernet

Features

  • 2 channel assembly riser cables
  • Comes in orange
  • High performance components and construction
  • Multi-mode cabling
  • High specific strength-to-weight ratio and compact cable design for limited conduit space and tight bends in long cable pulls
  • Helically stranded core for flexibility, survival in difficult installations, and mechanical protection for the fibers
  • Lower installed cost
  • High performance tight-buffered coating on each fiber for environmental and mechanical protection
  • High crush resistance may eliminate the need for innerduct
  • 900 μm buffer eliminates the need for costly and time-consuming installation of fanout kits or pigtail splices because connectors terminate directly to the fiber.
  • UL Listed in accordance with NEC section 770.179(a) for use in ducts, plenums and air-handling spaces