You Have:0 Items
Total:$0.00

User login

Bulk Fiber SingleMode/04str, OS2, OFNR, DIB, InDoor, YEL - Per Foot

Built with fluoropolymer material, this bulk fiber cable was designed for indoor usage and provides optimal data speeds. 

SKU:
91-804500-0000Y

Specifications

Fiber Performance       Mechanical and Environmental  
Fiber Code
SLX
Industry Standard Designation
Low Water Peak
Single-Mode
ITU-T G.652.D
Core/Cladding Diameter (μm)
9/125
Wavelength (nm)
1310/1550
Maximum Cabled Attenuation (dB/km)
0.5/0.5
Primary Coating Diameter (μm)
245
Secondary Buffer Diameter (μm)
900
Zero Dispersion Slope (ps/nm2-km)
0.092
Proof Test Level (kpsi)
100
Impact Resistance
EIA/TIA-455-25A
1,500 Impacts
Crush Resistance
TIA/EIA-455-41A
1,800 N/cm
Operating Temperature
-40°C to +85°C
Storage Temperature
-55°C to +85°C
Installation Temperature
(actual temp. of cable)
-10°C to +60°C
Flame Retardancy
UL Listed Type OFNR (UL
1666) and FT4 (CSA C22.2
No. 232)
Installation and Operating Characteristics       Cable Characteristics  
  Installation Operating
Max Tensile Load
1,400 N (310 lbs)
450 N (100 lbs)
Min Bend Radius
7.7 cm (3.0 in)
5.1 cm (2.0 in)
Jacket Color
Yellow
Jacket Material
Fluoropolymer
Buffer Material
Plenum
Cable Weight
24 kg/km (16 lbs/1000')
Cable Diameter
5.1 mm ( 0.20 in)

Applications

  • Indoor-only flexible flame retardant plenum jacketed cables available
  • 2 to 12 fibers
  • Can have interlocking armor applied to cables as an alternative to conduit installation

Features

  • High performance components and construction
  • High specific strength-to-weight ratio and compact cable design for limited conduit space and tight bends in long cable pulls
  • Helically stranded core for flexibility, survival in difficult installations, and mechanical protection for the fibers
  • Lower installed cost
  • High performance tight-buffered coating on each fiber for environmental and mechanical protection
  • High crush resistance may eliminate the need for innerduct
  • 900 μm buffer eliminates the need for costly and time-consuming installation of fanout kits or pigtail splices because connectors terminate directly to the fiber.
  • UL Listed in accordance with NEC section 770.179(a) for use in ducts, plenums and air-handling spaces